Volvo 2015 XC60, Owner'S Manual

Page: 164 / 430

06 Locks and alarm
06
162
*
Option/accessory, for more information, see Introduction.
Remote control key - personalisation*
The key memory in the remote control key
(p. 161) means that certain settings in the car
can be individually adapted for different peo-
ple.
The key memory function is available in com-
bination with power* driver's seat.
Settings for door mirrors (p. 103), driver's
seat, steering force (p. 253) and the com-
bined instrument panel's theme, contrast and
colour mode (p. 65) can be stored in the
memory, depending on the car's equipment
level.
The function
1
can be activated/deactivated in
the menu system MY CAR. For a description
of the menu system, see MY CAR (p. 112).
When the function is activated, the settings
are automatically linked to the key memory.
This means that a change in a setting will
automatically be saved to the specific remote
control key's memory.
Storing settings
Make sure that the key memory function is
activated in the menu system MY CAR.
Proceed as follows in order to store the set-
tings and use the key memory in the remote
control key:
1. Unlock the car with the remote control
key in whose memory the setting 2 shall
be stored.
2. Make the desired settings for e.g. the
seat and the door mirrors.
3. The settings are stored in the current
remote control key's memory.
The next time the car is unlocked with the
same remote control key, the positions that
are stored in the key memory will be set auto-
matically - providing that they have been
changed since the last time the current
remote control key was used.
Emergency stop
If the seat accidentally begins to move, press
one of the setting buttons for the seat or
memory buttons in order to stop the seat.
Restarting to reach the seat position stored in
the key memory is performed by pressing the
unlock button on the remote control key. The
driver's door must then be open.
WARNING
Risk of crushing! Make sure that children
do not play with the controls. Check that
there are no objects in front of, behind or
under the seat during adjustment. Ensure
that none of the rear seat passengers is in
danger of becoming trapped.
Changing settings
If several people each with a remote control
key approach the car, then the settings for
e.g. seat and door mirrors are implemented
for the person whose remote control key
unlocks the driver's door.
If the driver's door has been opened by
person A with remote control key A, but
person B with remote control key B shall
drive, then the settings can be changed as
follows:
•
Standing by the driver's door, or sitting
behind the steering wheel, person B
presses the button for unlocking on
his/her remote control key, see Remote
control key - functions (p. 164).
•
Select one of three possible memories for
seat adjustment with seat button 1-3, see
1 Called Car key memory in MY CAR.
2 This setting does not affect settings that have been stored in the power seat's memory function.