Volvo 2015 XC60, Owner'S Manual

Page: 126 / 430

03 Instruments and controls
03
124
*
Option/accessory, for more information, see Introduction.
Trip computer - trip statistics*
Information is stored about completed trips
containing average fuel consumption and
average speed, which can be viewed in the
centre console's screen as a bar chart.
Function
Trip statistics 27 .
Each bar symbolises 1 km or 10 km driven
distance, depending on the scale selected -
the bar at the far right shows the value for the
current kilometre or 10 km.
Using the
TUNE
control, the scale for the
bars can be changed between 1 km and
10 km - the cursor on the far right changes
position between up and down in relation to
the scale selected.
Operation
Different settings can be made in the menu
system MY CAR , see MY CAR (p. 112) -
there, find
Trip statistics
.
With the "
Reset when vehicle has been off
for minimum 4h
" option highlighted, all sta-
tistics are deleted automatically once driving
is complete and the car has been stopped for
4 hours. Trip statistics start again from zero
the next time the engine is started.
•
Reset when vehicle has been off for
minimum 4h
- highlight the box by
selecting ENTER and go back out of the
menu by selecting
EXIT
.
If a new driving cycle is started before
4 hours have elapsed then the current period
must first be deleted manually using the
"
Start new trip
" option.
•
Start new trip
- ENTER is used to delete
all previous statistics, go back out of the
menu by selecting
EXIT
.
See also information on Eco guide (p. 68).
Related information
•
Trip computer - supplementary informa-
tion (p. 123)
27 The figure is schematic - layout may vary depending on car model or updated software.