Volvo 2010 XC60, Owner'S Manual

Page: 138 / 326

04 Comfort and driving pleasure
Audio system
04
138 *
Option/accessory, for more information, see Introduction.
Audio functions
Center console, controls for audio functions
Internal audio sources: AM , FM and CD
External audio source or Sirius satellite
radio*. For connection, see page 137
Push button and knob controls for adjust-
ing sound settings
Menu navigation button
Volume and on/off
Audio volume and automatic volume
control
The audio system compensates for disrupting
noises in the passenger compartment by
increasing the volume according to the speed
of the vehicle. The level of sound compensa-
tion can be set at low, medium or high. Select
the level under Audio settings Auto
volume control .
External audio source audio volume
External devices such as an MP3 player can be
connected to the AUX input, see page 137. The
volume of the external sound source AUX may
be different from the volume of the internal
sound sources such as the CD player or the
radio. If the external sound source's volume is
too high, the quality of the sound may be
impaired. To help prevent this, adjust the input
volume of the external audio source:
1. Set the audio system in AUX mode using
MODE and use (4) to navigate to AUX
input volume .
2.
Turn the control (3) or press / the nav-
igation button.
NOTE
Sound quality may be affected if the MP3
player is being charged while the system is
in AUX mode. To help prevent this, avoid
charging the MP3 player in a 12-volt socket
while it is being played.
Sound settings
Press the control (3) repeatedly to toggle
among the sound settings. Adjustments are
made by turning the control (3).
•
Bass
– Bass level.
•
Treble – Treble level.
•
Fader – Balance between the front and
rear speakers.
•
Balance – Balance between the right and
left speakers.
•
Subwoofer * – Level for the bass speaker.
The subwoofer can be switched off by
turning control (3) counterclockwise to
Min . The location of the subwoofer is
shown in the illustration.
•
Surround * – Surround settings.
Under Surround, 3 channel stereo or Dolby
Surround Pro logic II can be activated by
selecting
3-ch or Dpl2 respectively. This ena-
bles the following options: