Power Trim Panel
The Power Trim panel allows you to adjust the angle
of the drive with respect to the transom. For twin
engine installations, the power trim panel may be used
to make individual or simultaneous adjustments to the
drives.
By trimming out the drive away from the transom, the
bow will be raised in relation to horizontal and trimming
in the drive will lower the bowt.
The
+
button will trim the drive away from the transom
(i.e., the bow will be raised in relation to horizontal).
The
–
button will trim the drive in towards the transom
(i.e., lower the bow).
For further information on power trim, please refer to
Maneuvering
.
Power Trim Instrument and
Displays
Digital Instrument
51279a
The digital instrument shows the trim angle in digits
and the trim range (TRIM) and beach range (BEACH)
in letters. When in beach range the LED
1
lights
orange. When in tilt range, the LED
2
lights red (no
letters are displayed).
When the system is first started, the digits read “88”
and both words “TRIM” and “BEACH” are displayed.
Analog Instrument
50897
This instrument shows the current position of the drive.
Beach range is marked with an orange zone and Tilt
range with a red zone.
1.
Trim range
2.
Beach range (orange).
3.
Tilt range (red).
Instruments and Controls
50
47706354 08-2015 © AB VOLVO PENTA
