58
Maintenance: Fuel System
1. Place a receptacle under the filter.
2. Undo the T-bolt (2) and remove the cover (3).
3. Take out the insert carefully while turning it.
4. Drain off water and contaminants through the drain
plug (4).
5. Fit a new filter insert and fill the container with cle-
an fuel.
IMPORTANT!
Cleanliness! No contaminants
must be allowed in the fuel system.
6. Change the gasket on the cover and the O-ring
on the T-bolt. Moisten the gasket and O-ring with
fuel before assembling.
7. Fit the cover and tighten it by hand.
8. Wipe off any fuel from the heat shield.
9. Dual filter: Change the other filter insert in the
same way.
10. Open the fuel cocks and put the knob (1) in posi-
tion for normal running. Make sure there are no
leaks.
Plus d'informations sur : www.dbmoteurs.fr
Summary of Contents for D49A MS
