44
Maintenance: Engine
Using the turning gear
1. Loosen the two bolts securing the shaft lock plate
and remove the plate from the shaft (groove).
2. Push in the shaft all the way to the TURN posi-
tion.
3. Put a socket to the hexagonal end of the shaft
and turn the shaft with a ratchet handle for tur-
ning.
4. After turning the engine, pull the shaft back to the
RUN position, secure the shaft with the locking
device and tighten the plate bolts. Make sure the
plate is secured properly.
WARNING!
Before starting the engine, make
sure the turning gear is in the RUN position and
is locked.
Plus d'informations sur : www.dbmoteurs.fr
Summary of Contents for D49A MS
