20
Standard Control System
Warning displays
If the acoustic alarm sounds, one of the warning dis-
play lamps will immediately start to flash to indicate
the cause of the alarm.
1. High coolant temperature.
2. Low lubricant pressure.
3. Generator not charging
After an alarm
Press the “Alarm test” button to acknowledge and
terminate the acoustic alarm. The relevant warning
lamp will continue to flash until the fault has been rec-
tified.
Alarm test
After pressing the “Alarm test” button, the warning
lamps will come on and the acoustic alarm will start to
sound. Make a habit of always performing an alarm
test before starting.
Starting switch
Together with the starter keys a plate containing the
key code is delivered. This code is required when
ordering additional starter keys. Keep the code in a
safe place.
S
= Stop position.
0
= Key can be inserted and removed.
I
= Voltage on (drive position).
II
= Not used
III
= Start position.
Plus d'informations sur : www.dbmoteurs.fr
Summary of Contents for D49A MS
