14
Description of Operating Mode
Operation mode
Description
LCD display
Standby mode / Power saving mode
Note:
*Standby mode: The inverter is not
turned on yet but at this time, the
inverter can charge battery without AC
output.
*Power saving mode: If enabled, the
output of inverter will be off when
connected load is pretty low or not
detected.
No output is supplied by the unit
but it still can charge batteries.
Charging by utility.
No charging.
Fault mode
Note
:
*Fault mode: Errors are caused by errors
inside circuit or external reasons such as
high temperature, output short-circuit
and so on.
No output and No charging
No charging.
Line Mode
The unit will provide output
power from the mains. It will
also charge the battery at line
mode.
Charging by utility.
Battery Mode
The unit will provide output
power from battery
Power from battery only.
