background image

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). 
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in 

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. 

This publication represent the technical status at the time of printing.  
© Copyright 2022 by Conrad Electronic SE. 

2388642_V2_0322_02_m_VTP_en

Troubleshooting

Problem

Possible cause?

The measured value does not 

change.
“Device not connected” display

The meter is not connected.
Remedy: Disconnect the meter from the smartphone 

and reconnect it. Follow the on-screen instructions.

•  The following list shows the formaldehyde effects depending on its concentration in the 

ambient air:
0 – 0.08 ppm 

Normal, healthy environment

0.09 – 1.99 ppm 

 Causes irritation of nasal and pharyngeal mucous membranes and 

eyes

2.00 – 3.99 ppm 

Stinging sensation in the eyes, nose and throat

4.00 – 5.00 ppm 

Lacrimation, discomfort, tolerable for max. 30 minutes.

 

The above values are for reference only and may differ depending on the individual. 

A concentration of 0.1 ppm should not be exceeded, not even briefly.

•  Harmful formaldehyde concentrations can be reduced to harmless levels through ventilation. 

The formaldehyde emission source should be located and removed.

Disposal

  Electronic devices are recyclable waste and must not be placed in household waste. 

At the end of its service life, dispose of the product in accordance with applicable 

regulatory guidelines.

Technical data

Port ...................................................................USB-C (OTG)
Measuring range ...............................................0.00 – 5.00 ppm
Resolution .........................................................0.01 ppm
Accuracy (+/- % of measuring range) ...............+/-5%
Operating system .............................................Android (version 6.0 or later)
Ambient conditions ...........................................0 to +50 °C/20 – 80% RH
Product dimensions (L x W x H) .......................33 x 62 x 14 mm
Weight ..............................................................approx. 20 g

Summary of Contents for FAS-100









Reviews: