• You can check which start mode is active, by loading the exist-
ing configuration file into the web interface, in the PDF report
or by entering the function menu of the data logger.
• You can check which stop mode is active, by loading the exist-
ing configuration file into the web interface or by entering the
function menu of the data logger.
•
For further instructions regarding loading the existing configu
-
ration settings, please refer to “Other settings” on page 92.
• For further instructions regarding entering the function menu,
please refer to “Enter function menu” on page 103.
11. Operation
a) Overview of operation modes
1
Operation modes and settings
For performing following configuration settings, please refer to
“Measurement options - Basic Setting” on page 87.
Mode 1
Function Logging starts immediately.
Logging stops when memory is full.
Setting
• Select “IMMEDIATELY UNTIL MEMORY
FULL” as “RECORD START CONDITION”.
94
