Enable LED
Alarm
The LED alarm indicates when a measured
value is outside the defined range.
To disable the LED alarm, remove the check-
mark in the checkbox.
To enable the LED alarm, check the check-
box .
When using the data logger at ex-
tremely low temperatures, disable
the LED alarm to decrease power
consumption and to prolong the
battery life.
Limit Pause
Function
During recording, the limit alarm can be
suspended.
Select “ENABLE” or “DISABLE” to enable/
disable the pause function.
Pause function will not stop the
recording.
Low Alarm /
High Alarm
Select parameter(s) by checking parameter
checkboxes and specify the low and high
alarm in numbers.
The red LED control light (2) is
flashing, when measured value is
outside of the defined range of low
and high alarm value.
90
