• Press and hold buttons
DOWN
and
ENTER
and connect the
data logger to your computer. “USB” is shown in the LC dis-
play. All data is deleted.
• Release the buttons.
• The data logger driver on your computer is empty, that means
all data was successfully deleted. Disconnect data logger from
your computer.
e)
Upgrade firmware
•
Download the latest data logger firmware from the product
page on www.conrad.com.
•
long
press
ENTER
Press the button
DOWN
(6) several times until the 4 digit
logger identifier and “ID” are shown on the display.
Press and hold the button
ENTER
(8) until the 4 digit logger
ID is replaced by “ ”.
• Connect the data logger to your computer.
•
Drag and drop the firmware to the data logger drive on your
computer.
108
