36
Settings mode is disabled and cannot be used when MIN/MAX/AVG mode is enabled.
1
Setting the temperature unit
• Select the temperature measurement option in SETUP mode. The "TEMP" symbol will appear.
• Press the button (15) to display the current temperature unit.
• Press the (13) or (14) button to toggle the temperature unit between °C and °F. The
current unit is indicated on the LCD display (7).
• Press the
button (15) to confirm and save the setting.
2
Setting the light intensity unit
• Select the light intensity measurement option in SETUP mode. The "LIGHT" symbol will ap-
pear.
• Press the button (15) to display the current measurement unit.
• Press the (13) or (14) button to toggle the light intensity unit between LUX and FC. The
current unit is indicated on the LCD display (7).
• Press the
button (15) to confirm and save the setting.
3
Setting the sound level unit
• Select the sound level measurement option in SETUP mode. The "SOUND" symbol will ap-
pear.
• Press the button (15) to display the current measurement unit.
• Press the (13) or (14) button to toggle the sound level unit between dBA and dBC. The
current unit is indicated on the LCD display (7).
• Press the
button (15) to confirm and save the setting.
4
Setting the temperature offset
You can individually adjust the offset temperature for type K temperature measurements (also according to the tem-
perature sensor).
• Select the option for type K temperature measurements in SETUP mode. The "OFFSET" sym-
bol will appear.
• Press the (13) or (14) button to set/change the offset value.
• The current offset value is shown in display A on the LCD display (7). The measured tempera-
ture with the added offset value is shown in display B on the LCD display.
• Press the
button (15) to confirm and save the setting.
