1
.
IMPORTANT
SAFETY
INSTRUCTIONS
•
Before operating the UPS, make sure you carefully read all the instructions
and warnings in this manual.
In order to avoid any damage to the UPS, it is advised to transport it in its own
•
packing.
Place all the cables in a proper place so that they are not be stepped on or get
•
caught into people’s feet.
Don’t drop any foreign materials (like clips, nails etc...) into the cabinet.
•
•
In emergencies (damage to the cabinet, front panel, or mains connections,
splashing of liquid, dropping of any foreign materials into the cabinet), switch
off the UPS, disconnect the UPS from mains power and from battery, then
inform the authorized service center.
•
Do not connect any appliances to the UPS, which exceed its power range.
UPS may not work properly when input distortion or resistance is too high.
•
Earth cable should be chosen according to the current capacity. All
units’ earth connections, which are connected to UPS, should be
done with earth cable. Without earth connection or unproved earth
connected units are dangerous for user’s health, and have high risk
of electronic circuit board faults. Using earth cable with improper
diameter could be dangerous for user’s health and safety of the unit.
The UPS can only be repaired by the authorized technical service
personnel. Any attempt to open and to repair by the user on his own
could prove to be dangerous.
Placing magnetic storage media on the top of the UPS may result in
data corruption.
Special Precautions: When the UPS input comes from a generator:
-Output power capacity must be higher than the UPS rating, otherwise
the UPS and generator may not work properly;
-Output frequency of generator must be in range from 45 to 65Hz, and
wave form must be sine wave, otherwise the UPS and generator may
not work properly.
1
(58) 341-05-06 | [email protected] (58) 341-38-80 | [email protected] (22) 100-42-99
