background image

[email protected] (58) 341-05-06 | [email protected] (58) 341-38-80 | [email protected] (22) 100-42-99

7. WARRANTY

 

When  sending  the  device  to  the  service,  the  user  is  obliged  to  empty  the  pump  of 

residual water or other liquids, as well as to protect the device against any damage that may occur 
during transport. Any damage caused by the customer is not subject to warranty repair.
 

WARRANTY DOES NOT COVER:

ź

damage resulting from improper transport by the purchaser's means, and any mechanical 
damage caused by the use of non-original spare parts and as a result of improper use or the 
instructions in the operating manual,

ź

damage resulting from improper storage or maintenance,

ź

damage caused by pumping sand,

ź

damage caused as a result of connecting to the electrical installation that does not meet the 
conditions contained in the operating instructions, or does not comply with applicable power 
standards.

ź

damage caused as a result of tampering with the product of unauthorized persons, as well as 
any additional alterations to the repairs or changes (alterations) by unauthorized persons 
(e.g. disassembly of the plug).

ź

damage caused by external forces, the cause of which is outside the device covered by the 
warranty (e.g. frost damage, random accidents, natural disasters, force majeure, etc.)

Summary of Contents for OPTI ECO









Reviews: