VoloAccess™
User Manual
Copyright © Vololink Pty Ltd 2006-2010
V1.43 July 2010
Page 62 of 78
Troubleshooting
This section describes how to solve a number of issues that could occur during installation, configuration,
and use of the VoloAccess.
Before attempting any of the methods described in this section, make sure that the connected cables are
securely inserted and that the Power
indicator on the VoloAccess is On.
If none of the suggested methods resolve the issue, it is recommended that you:
●
Restart the VoloAccess.
●
Reset the VoloAccess to default factory configuration and reconfigure the unit.
To restart the VoloAccess, click
Restart i
n the navigation panel of the Admin page. If you still cannot
access the VoloAccess, switch the VoloAccess off then wait for 30 seconds before switching it on again.
To reset the settings to default factory configuration, use a paper clip to press the Reset button. Refer to
Reset the VoloAccess to default factory configuration
for further information.
The default factory configuration contains the original settings of your VoloAccess.
A reset to default factory configuration cannot be undone. If you reset the VoloAccess to default factory
configuration, all your previous configuration changes are replaced. If you have previously changed the
password, you will have to login to the VoloAccess Index page with the default User name "admin" and
Password "password".