Section 4 :
Maintenance
OPERATOR’S MANUAL
19
MAINTENANCE
c) Gaskets of the cream aspiration tube:
• Remove the cream aspiration tube from the air-regula-
tor. Remove the worn gaskets OR (7) from the cream
aspiration tube, using a non-metallic pointy tool, taking
care not to scratch the gaskets’ seats.
•
Remove all product residues from the seat and fit the
new gaskets (8), lubricating them with the food grease
supplied. Reassemble the cream aspiration tube inside
the hole of the air-regulator.
d) Gasket of the cream dispenser:
• Unscrew the nozzle counterclockwise and remove the
cream dispenser, using, if necessary, the fixing rod (in
-
cluded in the spare parts kit), from the dispenser faucet.
• Remove the worn gasket OR (9) from the cream dis-
penser, using a non-metallic pointy tool, taking care
not to scratch the gasket seat.
•
Remove all product residues from the seat and fit the
new gasket (10), lubricating them with the food grease
supplied. Screw clockwise the cream dispenser onto
the labyrinth tube inside the hole of the dispenser
faucet. Following screw clockwise the nozzle on the
cream dispenser.
e) Gaskets of the labyrinth:
• Turn the nozzle clockwise and remove the cream
dispenser using the fixing rod included in the spare
parts kit.
• Turn faucet 45° to the right and remove it.
•
Remove the lid, the fixing rod from the pump cover
and then extract the labyrinth tube and the labyrinth
from the machine.
• Remove the worn gaskets (11) from the labyrinth using
a non-metallic pointy tool, taking care not to scratch the
gaskets’ seats. Eliminate all product residues from the
gaskets’ seats and fit the new gaskets (12), lubricating
them with the food grease supplied.
• Place the labyrinth in the pump cover and block it with
the fixing rod (note: insert the fixing end of the labyrinth
in the pump cover).
• Insert the labyrinth tube into the hole on the front panel.
• Insert the faucet on the outlet tube, rotate it anticlockwi-
se to block it on the front panel.
• Turn counterclockwise the cream dispenser onto the
labyrinth tube (if necessary use the fixing rod included
in the spare parts kit).
• Turn counterclockwise the nozzle onto the cream di-
spenser.
7
8
9
10
11
12
12