background image

©

2016 The Vollrath Company L.L.C.

Part No. 350010-1 en

1/29/16

www.vollrath.com

The Vollrath Company, L.L.C.

1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Main Tel: 800.624.2051 or 920.457.4851
Main Fax: 800.752.5620 or 920.459.6573
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560

Technical Services
[email protected]
Induction Products: 800.825.6036
Countertop Warming Products: 800.354.1970
All Other Products: 800.628.0832

9. Press and hold the burring stone button. Let the blade rotate against

the deburring stone for 30-40 seconds. Release the button.

10.Simultaneously press and hold the sharpening stone buttons for 3-4

seconds. Release the buttons.

NOTICE: Pressing the buttons for longer than 3-4 seconds could

bend the blade, which could then damage the slicer.

11.Press and release the OFF (O) button and unplug the slicer.

12.Return the sharpener to the original position.

13.Clean the slicer. See “Clean and Sanitize the Slicer” on page 5.

Lubricate Carriage Slide Guides

Lubricate the carriage slide guides at least once a month and any time
that pushing the tray becomes difficult. Use the oil supplied with the
slicer or a food safe lubricant. Do NOT use cooking oil.

1. Press and release the OFF (O) button.
2. Unplug the slicer from the electrical outlet.

3. Put a few drops of the oil that was supplied with slicer into the

carriage slide lubricant access hole (OIL) on the front of the slicer.

SERVICE AND REPAIR

Serviceable parts are available on Vollrath.com.

To avoid serious injury or damage, never attempt to repair the unit or replace a damaged power cord yourself. Do not send units directly to
The Vollrath Company LLC. Please contact Vollrath Technical Services for instructions.

When contacting Vollrath Technical Services, please be ready with the item number, model number (if applicable), serial number, and proof of
purchase showing the date the unit was purchased.

WARRANTY STATEMENT FOR THE VOLLRATH CO. L.L.C.

This warranty does not apply to products purchased for personal, family or household use, and The Vollrath Company LLC does not offer a written
warranty to purchasers for such uses.

The Vollrath Company LLC warrants the products it manufactures or distributes against defects in materials and workmanship as specifically
described in our full warranty statement. In all cases, the warranty runs from the date of the end user’s original purchase date found on the receipt.
Any damages from improper use, abuse, modification or damage resulting from improper packaging during return shipment for warranty repair will
not be covered under warranty.

For complete warranty information, product registration and new product announcement, visit www.vollrath.com.

Summary of Contents for SLM330E/S









Reviews: