Vokkero GUARDIAN EUROPE Plus, User Manual

Page: 47 / 122

47 / 122
VOKKERO GUARDIAN EUROPE Standard & Plus - User Guide V2.0.0
EN
3.4.2. Channel (mode activated by default)
Adjust the terminal’s communication channel with the Channel trigger button.
• Push the trigger upwards to increase the channel number
• Push the trigger downwards to decrease the channel number
The channels available on the terminal depend on the terminal version; for more information,
refer to the channels table (document annex).
When you change channel, you will hear a beep.
When you reach the top or bottom channel, you will hear 2 consecutive beeps.
The selected channel is also indicated on the terminal LCD.
3.4.3. Group (accessible by configuration)
To change groups, you must also use the Channel trigger button:
• Push the trigger up to increase the group number
• Push the trigger down to lower the group number
VOKKERO® Guardian - Standard terminals (References ARF8150AA / ARF8152AA), have 4
groups from 1 to 4 (Gr1 to Gr4).
VOKKERO® Guardian - Plus terminals (References ARF8154AA / ARF8156AA), have 3 groups
from 1 to 3 (Gr1 to Gr3).
Group 0 links all available groups.
Thus, the terminals in groups 1 to 4 can only hear and speak with the members of their group.
Group 0 terminals (Gr0) can hear and speak with all groups.
When you change groups, a beep in the accessory’s loudspeaker signals that the terminal has
taken the change of group into account.
A double beep signals that you have reached the upper or lower limit.
Check the number of the selected group on the terminal’s LCD.
3.4. Terminal operation
3.4.1. Volume
Adjust the terminal volume with the Volume trigger button.
• Push the trigger upwards to increase the volume
• Push the trigger downwards to decrease the volume
The volume can be adjusted in a range from 0 to 10
When you increase or decrease the volume, you will hear a beep.
When you reach the maximum or minimum volume setting, you will hear 2 consecutive beeps.
The volume setting is also indicated on the terminal LCD.