RD-80e
DATA FILER
In the example the channel selected (Lead or Harmony) is set on channel MIDI 5.
Use the [DEC] and [INC] keys to select the MIDI channel of your choice then press [ESC]
to save the settings and display the Utility menu.
9.6.3 SETTING THE LEVELS
The Harmony Level, Lead Level, Reverb Level and Delay Level functions (“H-L”, “L-L”, “r-
L” and “d-L” on the display) allow you to adjust the levels of the Harmony channel, the
Lead channel and the reverb and delay effect respectively. The reverb and delay effects
are applied both to the original signal from the microphone and to the parts added by the
voice harmoniser.
Note that the Lead channel is only present if a LEAD type harmonisation is being used (for
the selection procedure, refer to point 9.6.1).
Once the function required has been selected, the display shows the value of the current
level, which can be modified using the [DEC] and [INC] keys. The range of values applicable
to the levels is from 127 to 0 (signal processed by the HVP absent).
On completion of the operation press the [ESC] key to save the settings and return to
display of the Utility menu.
After making the selection, press [ESC] to return to the menu. The settings will be saved
automatically.
9.6.2 SETTING THE HARMONISER MIDI RECEPTION CHANNELS
Using the Harmony Channel (“H-C” video page) and Lead Channel (“L-L” video page)
functions, you can set the MIDI channels of the Harmony channel and of the Lead channel
of the HVP respectively.
The Harmony channel contains the chords for harmonisation of the voice, while the Lead
channel contains the melody line of the song.
Note that the Lead channel is only present if a LEAD type harmonisation is being used (for
the selection procedure, refer to point 9.6.1).
Once the function has been selected, the display will show the current MIDI channel for
the function selected:
93
