![background image](http://html.mh-extra.com/html/vogt/hec-10/hec-10_service-manual_1044451036.webp)
HEC-Series Service Manual
INSTALLING YOUR TUBE-ICE MACHINE
10/21/01
3-19
Installation Review: A CHECKLIST
Make a visual check to be sure these steps have been taken BEFORE continuing.
CHECK: _____ PRIOR TO OPENING VALVES, check all joints for leaks which may have
developed during shipment. {NOTE: The required charge of Refrigerant 22 has been isolated in the
Receiver (15R).}
CHECK: _____ All water supply and drain connections for conformity to requirements stipulated in
this manual. See FIGURES 3-4, 3-5, and TABLE 3-1.
CHECK: _____ Electrical supply for proper size of fuses and for compliance to local and national
codes. See the machine nameplate for minimum circuit ampacity and maximum fuse size.
CHECK: _____ All field installed equipment (air-cooled condenser, ice storage bin, ice spreader,
etc.) for proper installation.
CHECK: _____ The applicable portion of the warranty registration/start-up report for proper
completion.
CHECK: _____ The position of all push button switches to assure they will or will not start
automatically as desired.
NOTE: This machine is controlled by a PLC and can automatically start with power to the machine
after a two hour time lapse if the ice switch is in the on position and all other requirements are met.
Summary of Contents for HEC-10
