© 2022 United States Stove Company
11
VENTING YOUR PELLET STOVE INTO AN
EXISTING CLASS A 6” CHIMNEY SYSTEM
1.
You must have the existing chimney system cleaned
and/ or inspected by a qualified chimney sweep before
proceeding with the installation of your pellet stove.
2. To the right is an example of an installation using part
number 860001, 3-6” transition into 6” connector pipe.
the illustration is only an example. Please conform
to any local building codes or regulations having
jurisdiction before you have a qualified installer
proceed with this installation.
WARNING:
You may want to locate any utilities or obstacles inside
the wall before attempting this install. Make sure to
keep in mind your unit’s clearance requirements.
1. Mark the area and then cut the wall for vent installation
if needed.
2.
Install the wall thimble as specified by the
manufacturer. (wall thimble sold separately)
3.
Install venting.
Existing Class ‘A’
6” Chimney System
3” PL Vent
Clean Out Tee
Support
Bracket
Ceiling
Support
3” to 6” Pipe
Adapter
TO STOVE
INSTALLATION
