Installation
Instructions
Page
5
PFW 6851
Wood Stud Installation
THE FOLLOWING STEPS MUST BE PERFORMED BY TWO PEOPLE.
Wall Stud
E l e c t r o n i c
Stud Finder
Step 1
. Determine the desired viewing location. Use a
viewing
location.
Step 2
|+ $
to mark the center of each stud.
Step 3
. Drill a pilot hole at the marked location using a
!:
!: 4
Bit
Wall Stud
Two people must perform the installation. One
person must hold the mount while the other person
levels the mount. The mount must remain in place
while the mounting hardware is tightened.
| !: "
pilot holes.
<;>
used in the installation of this product.
Upper Mounting
Channel
Mounting Slot
Flat Washer
?!@:]"*
!;:%
Wrench
Step 4
. Level the mount.
Step 5.
Align the mounting slot with the drilled hole.
Step 6
"<>?!@:[\: "
# " " !;: %
4 " "
at this time.
4 }| +'" "
attaching the mount to the wall. Improper
installation may result in personal injury or
damage to property.
When determining viewing height, the center
of the TV should be at eye level while sitting in
as room decoration, raise it to the point where
the bottom of the screen is at eye level while
sitting and the top is eye level when standing.