background image

Page 2  

 

 

 

 

 

 

 

 

                    Installation Instructions

Table of Contents

Warning Statements

Warning 

Statements 

         2

Parts 

List 

          3

Installation 

Tools          3

Wood 

Stud 

Installation 

         5

Concrete 

Surface 

Installation 

        7

Determining 

the 

Mounting 

Hardware 

       8

Universal 

Spacer 

Installation 

        9

Griplate

 

Installation 

         9

Mounting 

Bracket 

Installation 

        10

Adapter 

Plate 

Installation 

(optional) 

       11

Attaching 

the 

Flat 

Panel 

to 

the 

Wall 

       12

Securing 

and 

Leveling 

the 

Flat 

Panel 

       12

Adjusting 

the 

Flat 

Panel 

Tilt 

        13

Plastic 

Channel 

Cover 

Installation 

       13

 

Warranty           15

PFW 6851

PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND 

 

COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND 
PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE 
REFERENCE.
VOGEL’S DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY VOGEL’S 
PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED  
ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, 

 

ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER 

 

RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.

THE SURFACE MUST BE CAPABLE OF SUPPORTING AT LEAST FIVE TIMES THE WEIGHT OF THE FLAT PANEL. IF NOT, THE 
STRUCTURE MUST BE REINFORCED. THE MAXIMUM WEIGHT THAT CAN BE USED WITH THIS PRODUCT IS 79 KG. PROPER 
INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, 
MUST BE ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN DEATH.

SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT. USE PROPER SAFETY 
GEAR AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY.

     !" " "#
panel.

"$%"&"''"
recommended.

*"+  "!""$ % 
  -"!  "  

/%    -"!  " +
damage to the mounting surface.

This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal injury.

4  "4  +$+

Summary of Contents for PFW 6851















Reviews: