Installation
5
Wall Mounting
Your telephone is designed for GTE- and AT&T-type RJ11W wall
jack mounting. If desired, the telephone can be converted for wall
mounting by performing the following steps (refer to
Figure 1
):
1.
When installed in the desk mode, unplug the line cord and
remove the pedestal.
2.
Reconfigure the handset cradle tab for wall installation by first
removing the number designation strip with a paper clip to
expose the tab. Rotate the tab and reinstall it into the housing.
3.
Plug one end of the line cord into the LINE1 jack. Route the cord
through the channel on the base. Plug the other end of the
cord into the jack outlet on the wall.
2706 Caller ID Model:
Plug in 9-volt power adapter.
Route and secure cord in channel provided on the bottom
of the phone.
4.
Align the mounting holes on the base with the mounting posts
on the jack outlet.
5.
When the base is positioned onto the posts, move the phone
down to secure the base to the jack outlet.
