Installation
9
Speakerphone Volume Switch
Speakerphone models are equipped with a sliding volume switch
to adjust the speakerphone volume. Slide the switch toward you
for lower volume or away from you for higher volume.
Handset Volume
Each model has a volume button(s) that can be pressed to increase
or decrease the handset volume while on an active call.
B/Z -Type Ringer
The B/Z ringer switch is located on the bottom of the phone near
the LINE jacks. This switch should be set to the Z mode for
business/hospitality applications and the B mode for residential
applications.
Directory Card
Frequently dialed numbers may be recorded on the directory card.
For models with speed dial memory, the card is used to record the
telephone numbers you store in the One-Touch speed dial
memory. To remove the card, place a paper clip in the hole located
at the top of the vinyl overlay covering the card. Gently lift to
expose the card.
Speakerphone models are: 2702, 2703, 2704, 2705.
The Caller ID model (2706) is also a speakerphone, however, the
volume is controlled by pressing the two volume (VOL) buttons.
The MSG light and the Line In Use (LIU) LEDs will not operate when
set in the B ringer mode.
