Caller ID Operation & Programming
29
Speakerphone does not
work
If the other person cannot hear you, make sure
the MUTE light is off.
Difficulty storing numbers
in memory
Make sure you are pressing the correct
sequence of buttons for storing memory.
NEW call light stays on
Make sure you have reviewed the entire call
history and checked for voice mail.
The caller’s name and
number do not show on
the display
If you answer a call before the caller ID
information is presented, the display will be
blank.
When the unit is connected to a PBX system,
you cannot receive caller ID information.
When you receive a call the
display shows “Out of
Area” or Private Call”
In some calling areas, the name display service
may not be available. For further information,
contact your telephone company.
You can’t dial numbers
from the caller ID list
When the unit is connected to a PBX system, this
option may not work even if you have edited the
number correctly.
You hear a noise on the
line when you answer a
call
If you answer a call too quickly (between the 1st
and 2nd ring), you may hear a (FSK) signal
before the call has been connected. This is
normal operation.
Condition
Suggestion
