VMIC VMICPCI-7755, Product Manual

Page: 92 / 126

92
B
VMICPCI-7755 Product Manual
2. If not already present, insert the ‘Windows Drivers’ CD-ROM. Click ‘Start’,
‘Run’, ‘Browse’. In the ‘Look in’ pull-down selection menu, select the ‘Windows
Drivers’ CD-ROM. Double-click on the ‘WinNT’ folder. Double-click on the
‘LAN’ folder. Double-click on ‘Makedisk’. Click ‘OK’.
3. Follow the on-screen prompts, then remove the floppy disk and label it ‘Intel
GD82559ER Fast Ethernet Adapter’.
4. Remove the CD-ROM.
Ethernet Adapter Driver Installation
1. Insert the ‘Intel GD82559ER Fast Ethernet Adapter’ driver disk. Insert the
Windows NT 4.0 installation CD-ROM. If the ‘Windows NT CD-ROM’ window
appears automatically, click ‘X’ to close the window.
2. Click ‘Start’, ‘Settings’, ‘Control Panel’. Double-click on ‘Network’.
3. In the ‘Network Configuration’ window, click ‘Yes’ to install Windows NT
Networking.
4. In the ‘Network Setup Wizard’ window, ensure ‘Wired to the network’ is
selected and click ‘Next’.
5. Click ‘Select from list’. Click ‘Have Disk’, ‘OK’.
6. In the ‘Select OEM Option’ window, ensure ‘Intel GD82559ER Fast Ethernet
Adapter’ is selected and click ‘OK’.
7. In the following window, ensure ‘Intel GD82559ER Fast Ethernet Adapter’ is
selected and click ‘Next’.
8. Select the desired protocols and click ‘Next’.
9. Click ‘Next’ two more times.
10. In the ‘Windows NT Setup’ window, enter ‘D:’. If a drive letter other than ‘D’ is
assigned to the CD-ROM drive, provide that drive letter in place of ‘D’. Click
‘Continue’.
11. Continue through remaining network setup screens, providing data relative to
the network configuration.
12. At ‘Network Settings Change’ window, remove the floppy disk and CD-ROM
and click ‘Yes’ to re-boot the computer.
13. When the computer re-boots, log on as ‘Administrator’. A ‘Service Control
Manager’ window may appear indicating that a service or driver failed to start.
This occurs because during the installation of Windows NT Networking, some
updated files were overwritten by files that were copied from the Windows NT
4.0 installation CD-ROM. To fix this issue, re-install Service Pack 6a and re-boot
the computer.