9
INSTALLATIONS
1.
Take out the main base (2) and support tube (1)
from packing carton, Connect signal line from the base plate
to the Support Tube.
2.
Put the support tube (1) into the base(2). Lock them with
screws (4) and install the feet cushion.
Take careful note
not to press or squeeze the signal line with the support tube.
MACHINE TESTING: At this time, you can quickly test the
electrical of the machine by plugging in the power cord and
powering up the machine. Flip the RED on/off switch at the
back of the machine, the display control panel should light up.
Press START/STOP to start the machine in its default mode (manual
mode). You can then manually adjust the speed for the two motors
independently. Once you tested the machine, you can continue
assembling the machine.
3.
Install the upper handle (5) on the support tube with screws (8)
The mounting plate on the handle can be loosen (by peeling back
the black rubber padding and loosen the screw) to make the
mounting plate align with the screw mounting holes on the pole
