Vmac VR70, Installation Manual

Page: 4 / 80

VMAC
– Vehicle Mounted Air Compressors
Toll Free: 1-888-241-2289
Fax: 1-250-740-3201
2
!
Document #1930190
Installation Manual for VMAC System V90G120
2016-2011 Ford F250-F550 6.7L Diesel
Changes and Revisions
Version Revision Details Revised by/date Checked by/date Reviewed by/date Implemented
E ECN 13-013, ECN 14-018 JR 30 Apr 2014 MH 06 May 2014 RD 06 May 2014 12 May 2014
F ECN 14-047 JR 14 Nov 2014 MH 20 Nov 2014 DB 19 Nov 2014 20 Nov 2014
G ECN 18-135 Washer Btl MSP 11 June 2018 KM/GB 12 Jun 2018 AWG 12 Jun 2018 13 June 2018
Important Information
This symbol is used to call your attention to instructions
concerning your personal safety. Watch for this symbol; it
points out important safety precautions, it means “attention,
become alert! Your personal safety is involved. Read the
message that follows and be alert to the possibility of personal
injury or death. Be alert; your safety is involved. While it is
impossible to warn about every conceivable hazard, let good
common sense be your guide.
This symbol is used to call your attention to additional
instructions or special emphasis on a specific procedure.
The information in this manual is intended for certified VMAC
installers who have been trained in installation procedures and for
people with mechanical trade certification who have the tools and
equipment to properly and safely perform the installation. Do not
attempt this installation if you do not have the appropriate
mechanical training, knowledge and experience.
Follow all safety precautions for under hood mechanical work. Any
grinding, bending or restructuring operations for correct fit in modified
trucks must follow standard shop practices.
All hoses, tubes, and wires that are rerouted or shifted
during installation must be secure so that they do not
contact excessively hot areas or sharp edges. Where
possible, use rubber coated P-clips. Follow the routing
suggestions in this manual and cover all hoses with the
supplied plastic loom.
!