Vmac VR70, Installation Manual

Page: 32 / 80

VMAC
– Vehicle Mounted Air Compressors
Toll Free: 1-888-241-2289
Fax: 1-250-740-3201
30
Use Supplied M8 Flat Head Bolt Here
Install Glow Plug Module
This Side Using M6 Bolts
Goes To Stud
On Firewall
Tie Strap Negative Battery Cable Harness Here .
Positive Terminal Lock Nut
Negative Post
Figure 3.19
□
Using a hammer, flatten the raised, rolled edge around the
fender sub frame to provide clearance for the glow plug bracket.
□
Connect the three connectors to the glow plug module.
□
Install glow plug bracket. Use supplied M6 nut to secure the
back leg to the stud on the firewall, (Figure 3.19).
□
Use supplied M8 flat head bolt to hold the long leg of the glow
plug bracket to the fender sub frame, but DO NOT TIGHTEN at
this point.(Figure 3.19).