Vmac VR70, Installation Manual

Page: 11 / 80

VMAC
– Vehicle Mounted Air Compressors
Toll Free: 1-888-241-2289
Fax: 1-250-740-3201
9
□
Remove passenger side battery bracket and battery.
□
Disconnect the mass air flow sensor from the top of the filter box.
□
Remove filter box (both upper and lower sections).
□
Remove tube and resonator that connects the filter box to the
turbo intake.
□
Cover turbo intake.
□
Remove passenger side hood strut and hood strut ball stud from
the hood, (save for later use).
□
Remove lower hood strut ball stud from inner fender.
□
Remove positive terminal block and wiring connector panel from
passenger side battery box. To remove wiring panel pry up.
Positive terminal block has one clip and slides up to remove.
□
Disconnect windshield washer tube from joint above passenger
side battery box on top of firewall.
□
Unplug wiring harness from windshield washer pump and
remove wiring from front lower passenger side battery box.
□
Unplug glow plug module connectors from bottom of passenger
side battery box (3 connectors).
□
Remove the bolt from wheel well that secures inner fender to
battery box.
□
Remove passenger side battery box (save bolts for later use).