4.0 Completing the Installation
4
VMAC – Vehicle Mounted Air Compressors
Toll Free:
1-888-241-2289 Local: 1-250-740-3200
Fax: 1-250-740-3201
16
ake sure that the following have been completed before operating
heck the compressor oil level. The compressor has been filled
heck the hydraulic oil level
o a final inspection to make sure that all fasteners and
heck that all hoses and wiring are secure and protected.
lock
e
arm it before activating
Make su e that the following have been completed:
perate the system with an air tool for at least 1/2 hour (1 hour
heck all components once the compressor and truck engine
.1 Before Operation Checklist
M
the PREDATAIR for the first time:
C
to the correct level prior to shipping, but the oil is very clear and it
is difficult to see the level.
C
D
connections are tight.
C
4.2 After Engaging the Hydraulics Checklist
Place the truck in a safe operating position and b
!
the wheels. Ensure that there are no people around th
truck before beginning the test.
Circulate the hydraulic fluid to w
the PREDATAIR when temperatures are below -15
°
C.
r
□
O
preferred). If this is a new configuration or design, operate for at
least 1 hour at the expected duty cycle to confirm acceptable
CFM and temperature performance (see section 5.0 Testing
Ventilation). Check hydraulic flow to ensure that the desired
GPM is maintained.
□
C
have been turned off and the system has cooled
