VKI Technologies Eccellenza Cafe Operating Manual Download

Page: 5 / 88

Eccellenza Café – Operating Manual

March 3, 2014

Safety Information

Your safety is very important to us. It is imperative that you read and understand

this safety information before proceeding with the installation and operation of this

coffee maker.



This coffee maker is designed for indoor use ONLY and must never be

installed outdoors.



The installation of this equipment must comply with all municipal,

state/provincial, and federal electrical and plumbing codes.



Installation and servicing of this equipment must only be

performed by qualified personnel. Do not attempt to install or service

this equipment if you are not qualified as it may result in personal injury.

There are no user-serviceable parts inside the equipment.



This equipment must be installed in a location with an ambient

temperature between 5°C-35°C (40°F-95°F).



The main water supply pressure must be between a minimum of 20psi

and a maximum of 100psi.



This equipment must be positioned so that the wall plug and the main

power switch are both easily accessible.



Do not connect the coffee maker to a voltage supply other than the

voltage indicated on the serial number decal.



Do not immerse this coffee maker or any part of this equipment in liquid.



Do not install the equipment in an area where water spray is present.



This coffee maker must be installed securely on a level surface. If it does

not appear to be a stable location, select another installation location.



Keep hands clear of the dispensing area at the front of the coffee maker.

Liquids being dispensed are extremely hot and can cause severe

burns.



Never disconnect the coffee maker by pulling on the service cord, and

never use the coffee maker if the service cord is damaged.



If the service cord is damaged, it must be replaced with a new service

cord that is available from your distributor or the manufacturer of this

equipment.

This equipment must be used specifically for the purpose for which it is
designed. The manufacturer is not responsible for damage or injury
resulting from improper use of this equipment.

Summary of Contents for Eccellenza Cafe

























































































Search results

Summary of Contents for Eccellenza Cafe

Reviews:

Related manuals for Eccellenza Cafe

Brands by name

Popular brands

VKI Technologies Eccellenza Cafe, Operating Manual

Search results

Summary of Contents for Eccellenza Cafe

Reviews:

Related manuals for Eccellenza Cafe

Brands by name

Popular brands