VKI Technologies Eccellenza Cafe Operating Manual Download

Page: 68 / 88

Eccellenza Café – Operating Manual

March 3, 2014

Press the

ENTER

button to access the S

OINT

menu. Once in this

menu, increase or decrease the temperature by using the

DOWN

buttons.

Empty Water Tank (to Valve Level)

This feature allows you to drain the water tank to the valve level using the hot water outlet

valve. This is a particularly useful feature should you need to replace an outlet valve as it is

not necessary to completely drain the water tank, leaving most of the hot water in the

tank. This greatly reduces the time required to reheat the water once the tank is refilled.

Turn off the water supply to the machine.

While in the Set-Up mode, scroll to the S

ATER

ANK

option and

press

ENTER

to access this menu.

The screen will display the following:

NOTE:

Avoid setting the temperature higher than 90°C (194°F)

as this may cause the dehydrated milk to coagulate in the
whipper system and milk tubes.

Summary of Contents for Eccellenza Cafe

























































































Search results

Summary of Contents for Eccellenza Cafe

Reviews:

Related manuals for Eccellenza Cafe

Brands by name

Popular brands

VKI Technologies Eccellenza Cafe, Operating Manual

Search results

Summary of Contents for Eccellenza Cafe

Reviews:

Related manuals for Eccellenza Cafe

Brands by name

Popular brands