Viz SDI I/O Module Operating Instructions
`12
NDI
®
O
UTPUT
Output from channels assigned to local SDI input sources is automatically sent to your network as NDI
signals. The editable
Channel Name
(Figure 9) identifies output from this channel to other NDI-enabled
systems on the network.
Note: NDI Access Manager, included in NDI Tools (available without charge
), can be
used to control access to NDI source and output streams.
H
ARDWARE
V
IDEO
D
ESTINATION
FIGURE 10
The
Hardware Video Destination
menu allows you to direct video output from the channel to an SDI connector
on the system’s backplane that is configured as an output (or another video output device connected to and
recognized by the system).
Video Format
options supported by the device are provided in a menu at right.
(Quad-link selections list the four associated SDI output numbers that will be used, for reference.)
See Appendix A: Key/Fill Connections for key/fill connection details.
S
UPPLEMENTAL
A
UDIO
D
EVICE
FIGURE 11
The
Supplemental Audio Device
allows you to direct audio output to system sound devices as well as well as
any supported third part audio devices you may connect (typically by USB). As required,
Audio Format
options are provided in a menu at right.
C
APTURE
This tab is also where you assign the path and filename for captured video clips and stills.
The initial
Record
and
Grab
Directories
are the default
Videos
and
Pictures
folders on the system, but we
strongly encourage you to use fast network storage volumes or an external drive connected to one of the
(blue) USB3 ports on SDI’s rear panel for video capture especially.
Note: Recording NDI sources is not supported.
