Viz SDI I/O Module Operating Instructions
`18
2.3.2
VIEWPORT TOOLS
FIGURE 19
Viz SDI IO’s channels each have a toolbar beneath their respective viewports. The various elements
comprising the toolbar are listed below from left to right:
1.
Channel name
– Can be changed by clicking on the label, and also in the
Configure Channel
panel.
a.
A
Configuration
gadget (gear) pops up next to the channel name when the mouse is over a
viewport.
2.
Record
and
Record Time
– The record button below each viewport toggled recording that channel;
the
RECORD
button in the bottom dashboard opens a widget enabling capture
from any SDI input
.
3.
Grab –
the
base filename and path for still image grabs are set in the
Configure Channel
panel.
4.
Full screen
5.
Overlays
G
RAB
FIGURE 20
A
Grab Input
tool is located in the lower right corner below the monitor for each channel. By default, still
image files are stored in the system
Pictures
folder. The path can be modified in the
Output
window
for the
channel (see the Output heading above).
F
ULLSCREEN
FIGURE 21
Clicking this button expands the video display for the selected channel to fill your monitor. Press
ESC on your keyboard or click the mouse to return to the standard display.
O
VERLAY
FIGURE 22
Found in the lower right corner of each channel, Overlays can be useful for visualizing safe
zones, centering and more. To use an overlay, just click on an icon in the list (see Figure 23)
more than one overlay can be active at the same time
1
2
3
4 5
FIGURE 23
