5. Remove the bar, the leveler, and the unattached bracket (
part A
)
from the wall.
Using the power drill and the 7/32” drill bit, drill into the pencil
mark as shown.
Ensure you are drilling into the stud.
Drill
the hole about 2” into the stud.
6. Remove
1 lag bolt
and
1 washer
from the pouch labeled
LAG
.
Place the other bracket (
part
A
) against the wall as shown, and
use a wrench to insert the lag bolt and washer into the hole you
just drilled. Do not insert the lag bolts completely. Leave 1/2” of
the bolt showing.
5
7/32”
Pencil Mark
6
6
Use Bottom Hole
