11
4
3. Remove
1 lag bolt
and
1 washer
from the pouch labeled
LAG
.
Place a bracket (
part
A
) against the wall as shown, and use a
wrench to insert the lag bolt and washer into the anchor.
4. Push the bar through the opening in the bracket (
part
A
) as
shown.
Push the other bracket (
part
A
) onto the bar and hold it flat
against the wall.
Ensure it is at least 16” from the other
bracket.
Snap on the leveler (
part
E
) and level the bar.
Mark the location of the 3 holes on the brackets as shown.
3
Use Bottom Hole
Level Bar
16”
1
2
3
Make Mark
