4
3. Remove
1 lag bolt
and
1 washer
from the pouch labeled
LAG
.
Place
part
A
against the wall as shown, and use a wrench to
insert the lag bolt and washer into the hole you just drilled.
4. Push the bar through the opening in the bracket (
part
A
) as
shown.
Push the other bracket (
part
A
) onto the bar and hold it flat
against the wall.
Ensure it is over the stud.
Snap on the leveler (
part
E
) and level the bar.
Mark the location of the hole in the bracket as shown.
5
3
Use Bottom Hole
Push Bar Through
Level Bar
Make Mark
