VIZIO VBR210 User Manual
38
www.VIZIO.com
Wired (Dynamic)
The default IP mode is set to
Dynamic
, which means your player will automatically detect and use your
network settings after you connect your Ethernet cable.
1. Turn on your player and your TV. If a DVD is not in the disc tray, the
Home m
enu will be
displayed. If a DVD is in the disc tray, press
SETUP
to display the
Home m
enu.
2. Connect one end of an Ethernet cable (not included) to the Ethernet port on your player.
3. Connect the other end of the Ethernet cable to your home network (usually your router). Your
home network must have broadband Internet access such as cable or DSL. Your player should
automatically get an IP address on the network and display the
Connected
icon in the upper right
hand corner of your TV.
Note:
If you need additional help setting up your network, please refer to the user manual for
your router or contact the manufacturer of either your router or your Internet service provider
if they provided the router for you.
Wired (Manual)
The default IP mode is set to
Dynamic
, which means your player will automatically detect and use your
network settings after you connect your Ethernet cable, but you can manually change those settings if
you are an advanced user and are comfortable with wired and wireless networks.
1. Turn on your player and your TV. If a DVD is not in the disc tray, the
Home m
enu will be
displayed. If a DVD is in the disc tray, press
SETUP
to display the
Home m
enu.
2. Connect one end of an Ethernet cable (not included) to the Ethernet port on your player.
3. Connect the other end of the Ethernet cable to your home network (usually your router). Your
home network must have broadband Internet access such as cable or DSL.
4. Press
◄
or
►
to select
Settings
, and then press
SELECT
.
5. Press
◄
or
►
to select
Network
, and then press
SELECT
.
6. Press
▲
or
▼
to select
Wired
and then press
SELECT
.
7. Press
◄
or
►
to change
IP Mode
to
Manual
and then press
SELECT
.
8. Manually change your network settings such as
IP
Address
,
Subnet
Mask
,
Default
Gateway
,
the
Primary
DNS
, and
Secondary
DNS
.
9. Press
▲
or
▼
to select
Apply
and then press
SELECT
.
Note:
If you need additional help setting up your network, please refer to the user manual for
your router or contact the manufacturer of either your router or your Internet service provider
if they provided the router for you.
