Warning
www.vizaar.com
The device can be connected to the public electric supply mains through a ‘IEC-plug lead’ included
in the delivery or a ‘IEC-plug lead’ which complies with the local socket standards. The system ac-
cepts faultlessly all power supplies known worldwide with alternate currents of 96 VAC to 246 VAC
at 46 to 60 Hz. For safe operation, the device needs a reliable potential earth (PE) connection. In case
of doubt, an expert or the manufacturer must be consulted. The minimum output supplied by the
power connection can be derived from the device specifications contained in the instructions.
:: Warning
When operating the device outside the permissible operating conditions or with destruction caused
by usage which deviates from the instructions, non-compliance with the operating conditions or
through the usage of non-original spare parts or accessories as well as through impermissible ope-
ning of the device, the guarantee obligation or the guarantee commitment by the supplier or manu-
facturer lapses, in principle.
All components of the device must never be used in or in the vicinity of apparatus or equipment,
which are partly or fully energized by electric current of any type (e.g. transformers, motors, gene-
rators, switchboards etc.). The metallic housing oaf the camera conducts electricity and dangerous
currents are transmitted during every contact or even short-circuits can be triggered in the plant.
While connecting to the car’s voltage transformer, the base unit should be connected to
protective earth and the car body, even when a grounding plug is available.
Never connect a triploar plug to a bipolar socket! Avoid any contact between INVIZ
®
/ MATRIX
(and all working equipment) and components carrying electrical charges.
The system must be earthed properly in case of an electrified application in relationship to the
ground. If impossible, connect the system to the application or the ground (depending on which one
the user needs to touch). The user needs to be isolated against the current path of the earthed path.
In case an exchange of the lamp becomes necessary, one must proceed according to the procedure
in the instructions!
Never handle the main cable without working gloves! Considerable risk of getting injured! At the
same time, protective glasses must always be worn while operating the system.
The device must never be operated with damaged main cable. There is a danger that liquids might
penetrate the cable and thereby impair the functioning permanently or might cause a life threate-
ning electric shock to the operator! Even the use of a slightly damaged main cable can quickly lead
to the total destruction of the device due to the electric conductors laying inside. The operation of a
damaged main cable is impermissible within the area of jurisdiction of the European Union, since the
regulations on emission of electromagnetic radiation can no longer be adhered to with safety.
Never bring the device in contact with corrosive substances of any kind (acid or alkali).
Risk of damage and injury while manipulating the main cable and camera head. Never bring the
device in contact with solvent containing liquids! Risk of damage!
Never insert the device in plant parts the contents of which are unknown!
Always ensure that the respectively inspected metallic pipeline systems conform exclusively to a
homogenous earthing potential; electrically insulated transition points (e.g. sealings, plastic line
sections) can exhibit different electric earth voltage potentials depending upon the plant, which could
build up very high electric currents with sparking and substance burn-out in case of bridging through
the metallic, electrically conducting probe. Kindly consult your on-site expert in advance.
