7.1 Guarantee
viZaar guarantees, that all video endoscope
system components are faultless in
respect of material and fabrication. The
obligation from this guarantee is restricted
to the repair and the exchange of all
parts, wherein an error occured proper
use. The guarantee starts with the deli-
very of the device to the end consumer by
an
authorised viZaar dealer or directly from
viZaar.
The guarantee period is restricted to one
year. The guarantee is valid for the buyer,
and/or end consumer, and cannot be
transferred to third parties. The guarantee
expires for products, which are damaged
through accident, transport, alteration,
improper storage or non-purposive
application, or are opened and/or repaired
by unauthorized persons.
Excluded from this guarante
regulation are:
:: Wear and tear parts like lamps, steering
cables, braid work and light fibres.
:: Assembly groups exposed to risks like:
Water damage in the motor drive unit,
heat damage to the probe
head etc.
:: Merchandise like video recorder,
monitor, etc., which have a separate
manufacturer guarantee.
Special fabrications are subject to a
special guarantee agreement
viZaar does not undertake any guarantee
for damages to the device, which have
occurred through the insertion in plants
with electrical potential error.
During application in the hot zone of
nuclear plants the guarantee claim
expires in principle for the function of the
camera head. This is valid, in particular,
for the CCD image, the optic sensor,
sealing plastics and the light fibres.
For all further guarantee claims of
contaminated devices, viZaar offers an
on-site service against travel payment.
7.2 General device specifications
Device dimensions
All individual device dimensions are listed
in the individual sub-chapters of the
different systems.
Operating conditions
All individual operating conditions are
listed in the individual sub-chapters of
the different systems
General system data
:: 96VAC - 246VAC / 30W continuous / 2A
starting current
:: 45Hz - 60Hz
:: Composite/ F-BAS video out
(Y1,0Vpp/C0,3Vpp), impedance 75Ohm
:: PAL or NTSC video standard deliverable
:: Probe and camera materials:
polyurethane, polyolefin, VA-steel, viton,
epoxy resin, acrylic, glass, Lexan
:: White LED illumination
Camera / camera head
All individual camera parameters are
listed in the individual chapter of the
different systems.
viZaar reserves the right to errors and
changes attributable to technical progress.
7.3 Disposal of the device after end of
life-expectancy
All the devices of viZaar described in this
instructions manual shall be taken back
for disposal by viZaar without any
time-limit and free of cost if desired by
the legitimate possessor. viZaar shall not
pay for the costs of delivery. Prerequisite
is a largely clean condition without
adhering product residues or other toxic
contaminations. The device must never
be left next to household or bulky waste,
but must be disintegrated in component
types and must be introduced in the
commercial recycling system. The device
contains electro-chemical (storage)
support batteries and minor parts of
heavy metals, which must be properly
disposed of and recycled in accordance
with the valid guidelines within the EC.
6.4 Confirmation of CE conformity
This device possesses CE- identification
and fulfills the conformity with
standardisation EN 50081-2. The
fulfillment of this standard presupposes
the application in industrial area.
The device is designed for an application
under the following
elctro-magnetic conditions:
“commercial and, to a limited extent,
industrial segment (E2)”.
Manufacturer:
viZaar industrial imaging AG
Hechinger Straße 152
72461 Albstadt
Germany
7 Guarantee, technical data and conformity
www.vizaar.com
34
Summary of Contents for INVIZ BIG
Page 1: ......
Page 43: ...Affix www vizaar com...
