Never insert the probe in pressurized
containers or pipelines via sluices! The
entire probe is watertight up to the length
of the probe in most devices but is not
designed for fluid or general gas
pressure higher up. Beside the danger of
destruction through pressure forces,
Using the optional pushing poles and / or
pushing reel causes additonal endanger-
ment of the operator: Glass-fibre epoxy
poles may have splices on the surface
and can cause heavy injury of your hand
during handling. Always use rugged wor-
king gloves when operating with epoxy –
glass fibre pushing poles
Using the optional pushing poles and / or
pushing reel causes additonal endanger-
ment of the operator and facility: Endless
push poles on a reel are winded under a
enormous spring force – in the case you
open the reel break without keeping the
Using the optional pushing poles and / or
pushing reel causes additonal endanger-
ment of the facility: Defective or false
operated push poles may get stuck inside
the application without a chance of easy
retrieval. Never push the poles too
strongly, always inspect poles before
starting the inspection.
Using the optional pushing poles cause
additonal endangerment of the facility:
Always approve 100% push poles are
connected properly to each other ( exten-
sion) or to the camera before inserting
the probe. Not correctly linked pole-con-
Be careful employing centering tools to
the probe. Faulty operated or wrong
chosen centering trollies or rings can
cause the probe getting stuck inside
tubes and affiliated bends behind
obstacles, bends and weldings etc.
there is the danger of uncontrolled exit of
pressure medium into the control device
via a leaky probe. Depending on the pro-
perties of the pressure medium, there is
significant risk of injury or accident.
open end of the push pole under control,
the reel will unwind very fast and can
cause heavy injury to the operator and
persons nearby. Also any neighboring
material can be destroyed through a push
pole moving uncontrolled and fast.
nectors / locks will cause the fatal situa-
tion to open immediately when starting to
retrieve the probe after inspection (during
pulling). This will disable the operator to
retrieve the probe if one or more bends
have been inspected (getting stuck).
www.vizaar.com
Summary of Contents for INVIZ BIG
Page 1: ......
Page 43: ...Affix www vizaar com...
