www.vizaar.com
17
3.6 Option digital probe meter counter
The INVIZ BIG inspection system can be
equipped with an optional special digital
on-screen counter, exactly measuring the
‘in fact’ length of the inserted probe cable.
This option can not be installed in
systems with battery operation.
Compared with other counting equipment,
the viZaar counter option has to be installed
in front of the inspection application, to
guarantee most exact results. The unit is
calibrated to an accuracy of +/- 10mm
per 1000mm ( 1 meter +/-1cm).
Depending on the environment, the
counter can be mounted with a clamping
device or strong magnet close to the
tube/pipe entry like shown in the below
pictures. It is recommended to first
install the cabel into the counter, before
fixing the arm onto the tube like shown.
3 Supplementary equipment
When the counter is
employed only careful
pushing and pulling of the
epoxy fibre poles is allowed.
Any liquids from the appli-
cation (tube or pipe) shall
never penetrate the counter
when retrieving the probe.
Only connect the counter to
the system when it is
shut-off.
All values will be set to
zero, if the unit is switched
off during inspection.
3.6
3.6a
3.6d
3.6e
3.6f
3.6b
3.6c
open screw
insert probe
alternatively
insert push pole
Summary of Contents for INVIZ BIG
Page 1: ......
Page 43: ...Affix www vizaar com...
