VIVOTEK
User's Manual - 7
Status LED
Item LED status
Description
1
Steady red
Power on and system booting
Red LED off
Power off
2
Steady red & Green blinking every 1 sec.
Network normal (heartbeat)
Steady red & Green LED off
Network failed
3
Steady red & Green LED blilnking every 2 sec. Audio mute (heartbeat)
4
Red blinking every 0.15 sec. & Green blinking
every 1 sec.
Upgrading firmware
5
Red blinking every 0.15 sec. & Green blinking
every 0.15 sec.
Restoring default
Hardware Reset
The reset button is used to reset the system or restore the factory default settings. Sometimes
resetting the system can return the camera to normal operation. If the system problems remain
after reset, restore the factory settings and install again.
Reset: Press and release the recessed reset button with a straightened paper clip. Wait for the
Network Camera to reboot.
Restore: Press and hold the recessed reset button for a while to restore. Note that almost all
previous configuration changes will be restored to factory default.
SD/SDHC Card Capacity
This network camera is compliant with
SD/SDHC 32GB
and other preceding standard SD cards.
DI/DO Diagram
Please refer to the following illustration
for the connection method.
12V
+12V
Digital output
PIN 1
Power+12V
PIN 2
Digital input
PIN 3
Ground
PIN 4
