manualshive.com logo in svg

Vivotek SC8131, User Manual

The Vivotek SC8131 is a high-resolution surveillance camera designed for comprehensive monitoring. To easily operate this advanced device, you can download the free user manual from manualshive.com. Gain in-depth knowledge and understand its functionalities through the informative manual available for download now!

Share
Download
background image

 

 

VIVOTEK

 

160 - User's Manual

If the 

JPEG

 mode is selected, the Network Camera sends consecutive JPEG images to the client, 

producing a moving effect similar to a filmstrip. Every single JPEG image transmitted guarantees 

the same image quality, which in turn comes at the expense of variable bandwidth usage. Because 

the media contents are a combination of JPEG images, no audio data is transmitted to the client. 

There are three  parameters provided in MJPEG mode to control the video performance:

■ Frame size

You can set up different video resolution for different viewing devices. For example, set a smaller 

frame size and lower bit rate for remote viewing on mobile phones and a larger video size and 

a higher bit rate for live viewing on web browsers. Note that a larger frame size takes up more 

bandwidth.

■ Maximum frame rate

This limits the maximum refresh frame rate per second. Set the frame rate higher for smoother 

video quality.

If the power line frequency is set to 50Hz, the frame rates are selectable at 1fps, 2fps, 3fps, 5fps, 

8fps, 10fps, 15fps, 20fps, and 25fps. If the power line frequency is set to 60Hz, the frame rates 

are selectable at 1fps, 2fps, 3fps, 5fps, 8fps, 10fps, and 15fps. You can also select 

Customize

 

and manually enter a value. The frame rate will decrease if you select a higher resolution.

■ Video quality

Refer to the previous page setting an average or upper bound threshold for controlling the 

bandwidth consumed for transmitting motion jpegs. The configuration method is identical to that 

for the H.264. 

For Constant Bit Rate and other settings, refer to the previous page for details. 

► Video quality and fixed quality refers to the 

compression rate

, so a lower value will produce higher 

quality.

► 

Converting high-quality video may significantly increase the CPU load, and you may encounter 

streaming disconnection or video loss while capturing a complicated scene. In the event of 

occurance, we suggest you customize a lower video resolution or reduce the frame rate to obtain 

smooth video.

NOTE: 

Summary of Contents for SC8131



































































































































































































































































































Reviews:

No comments

Related manuals for SC8131

ABB 615 Series ANSI Manual preview
615 Series ANSI
Brand: ABB Pages: 60
Salda TPC User Manual preview
TPC
Brand: Salda Pages: 16
Icom IC-706MKII Manual preview
IC-706MKII
Brand: Icom Pages: 30
ICM Controls ICM330 Manual preview
ICM330
Brand: ICM Controls Pages: 2
ICM Controls ICM2909 Manual preview
ICM2909
Brand: ICM Controls Pages: 2
ICM Controls IG-02 Operating Instruction preview
IG-02
Brand: ICM Controls Pages: 2
ray Super Remote Setting Up preview
Super Remote
Brand: ray Pages: 11
Abocom AM7221 User Manual preview
AM7221
Brand: Abocom Pages: 10
Watts AMES 4000SS Series Installation And Repair Manual preview
AMES 4000SS Series
Brand: Watts Pages: 8
Watlow DIN-A-MITE C User Manual preview
DIN-A-MITE C
Brand: Watlow Pages: 20
oventrop 2104203 Operating Instructions Manual preview
2104203
Brand: oventrop Pages: 64
Argo-Hytos RPERX3-06 Operating Instructions Manual preview
RPERX3-06
Brand: Argo-Hytos Pages: 38
Anest Iwata FCV-3 Instruction Manual preview
FCV-3
Brand: Anest Iwata Pages: 8
Eaton DCF 800 TWIN Installation And Maintenance preview
DCF 800 TWIN
Brand: Eaton Pages: 2
Audioplex ISV-1 Installation Manual preview
ISV-1
Brand: Audioplex Pages: 1
YASKAWA CIMR-VC*****H**-00 series Quick Start Manual preview
CIMR-VC*****H**-00 series
Brand: YASKAWA Pages: 32
Samson TROVIS 5579 Mounting And Operating Instructions preview
TROVIS 5579
Brand: Samson Pages: 182
PMFoundations State Machine User Manual preview
State Machine
Brand: PMFoundations Pages: 5

Brands by name

Popular brands

Load more brands