VIVOTEK
User's Manual - 7
Requirements for Running Stereo Tracking Video Analysis:
1.
The recommended installation height ranges from
2.4
to
3.6
meters. If the camera is
unavoidably installed in a position higher than
3.6m
, you can use the zoom-in mode
operation. Different lens provide different FOVs. See the FOV tables at page 9 for
details.
2.
The embedded video tracking and counting analysis requires a monitoring session on
Microsoft IE 10 or IE 11 browser.
3.
Lens cleanliness is also required because dust spots or smears on dirty lens can
produce miscalculation of pixels, correlation, and movements.
4.
Avoid impacts to the lens modules. The relative positions of the lens have been carefully
calibrated in factory. Even if the lens positions have slightly changed, optical parameters
and stereo correlation will be affected, and then you should return the camera for a
repair.
5.
For other installation concerns, please refer to page 13, Considerations.
6
. Avoid glass and reflective materials, such as aluminum foils, in the field of view. If
unavoidable, you can use the Exclusive area settings to get rid of the side effects.
7.
Make sure the camera is installed appropriately above the area of your interest, e.g.,
an entrance to building. Also use a leveling tool to make sure the camera is mounted
horizontally level.
8
. Due to the system load, do not open two configuration web consoles at the same time.
IMPORTANT:
Refer to page 51 for the configuration details about the embedded
NOTE:
•
This camera is powered by a PoE switch or PoE injector. This equipment is to be
connected only to PoE networks without routing the the outside plant.
Symbols and Statements in this Document
i
INFORMATION:
provides important messages or advices that might help prevent
inconvenient or problem situations.
NOTE
: Notices provide guidance or advices that are related to the functional integrity of
the machine.
Tips
: Tips are useful information that helps enhance or facilitate an installation, function,
or process.
WARNING: or IMPORTANT:
: These statements indicate situations that can be
dangerous or hazardous to the machine or you.
Electrical Hazard
: This statement appears when high voltage electrical hazards might
occur to an operator.
Summary of Contents for SC8131
Page 94: ...VIVOTEK 94 User s Manual ...
Page 233: ...VIVOTEK User s Manual 233 ...