4x2 HDMI 2.0 Seamless Matrix Switcher
40
Command
Description
Command Example and
Feedback
#SET_EDID_MODE
UPL:
[PARAM]
Upgrade the EDID data of the HDMI
input port [PARAM]. [PARAM]=01~03
(1.HDMI IN~3.HDMI IN)
When the command applied, system
prompts to upload the EDID file (.bin).
Operation will be cancelled in 15
seconds. Please disconnect HDBT
connection before sending command to
ensure the data can be received
successfully.
#SET_EDID_MODE UPL:01
@EDID_MODE UPL:01
@EDID_MODE UPL:Please
Send Edid Data in 15s
#GET_EDID_MODE
[PARAM]
Get the EDID data of input [PARAM].
[PARAM]=01~04.
#GET_EDID_MODE 01
@EDID_MODE UPL:01
8.2.7 CEC Control
Command
Description
Command Example and
Feedback
#SET_CEC_MODE ON
Enable CEC control.
@CEC_MODE ON
#SET_CEC_MODE OFF
Disable CEC control.
@CEC_MODE OFF
#GET_CEC_MODE
Get CEC status.
@CEC_MODE ON
@CEC_MODE OFF
When CEC control is enabled, if the input source devices and display devices support
CEC, they can be controlled by sending CEC commands to replace IR remote.
According to the below command format to send specific command to control input
source or display devices.
#SEND_CECCMD [port]:[command]
The
[port]
represents the port number. The input ports are 01~03, and the output
ports are 04~06.
[port]
Description
01
1.HDMI input
02
2.HDMI input
03
3.HDMI input
04
1.HDMI output