4x2 HDMI 2.0 Seamless Matrix Switcher
27
7.7 RS232 Control Tab
Select
Local
or
HDBT Out
control mode.
Local:
Send RS232 commands to control the local third-party which is
connected to the RS232 port of the switcher.
HDBT Out:
Send RS232 commands to control the far-end third-party (e.g.
Projector) which is connected to the RS232 port of HDBaseT receiver.
Select
HEX
or
ASCII
format.
Baud Rate:
Supports 2400, 4800, 9600, 19200, 38400, 57600 or 115200.
Command Ending: NULL
,
CR
,
LF
or
CR+LF
can be chosen.
Command:
Type command in this textbox to be sent.
Trigger On:
Type Power On command in this textbox to turn on the third-party
device.
Trigger Off:
Type Power Off command in this textbox to turn off the third-party
device.